CONTROL METHODFront Panel Interface- Liquid Crystal Display (LCD) can display all current connections.
- Locally change input and output selections with front panel buttons.
- Digital VU-Meter displays audio levels for the currently selected port.
- Configuration and control can be done using the front panel buttons.
- Main menu allows the user to:
- Set serial address.
- Set serial speed.
- Set IP address.
- Set Subnet Mask.
- Adjust contrast.
- Force compensation.
- Show size.
RS232 Control- Configuration and control can be done through the serial port.
- Control the switch using the NTI Switch Control Program with Graphical User Interface (GUI control) via RS232.
- Selectable baud rate: 1200 through 9600.
- Baud rate is set via the main menu, serial command, telnet or web page.
Commands- CS-causes one INx/OUTx connection to occur.
- CA-causes all inputs to connect to specified output.
- RO-reads what input is connected to specified output.
- CC-save matrix.
- RC-recall matrix.
- CB-change baud rate.
- RV-version information.
- RU-reads size of matrix, reports number of inputs and number of outputs on specified switch.
- EA-set the IP address.
- EM-set the IP mask.
- EG-set the default gateway.
- ET-set the webserver timeout.
Ethernet Control- Configuration can be done over the Internet via web page or telnet.
Web Server (view product demo)- Security is ensured by password and user configurable timeout.
- Up to 25 users can access the web page at one time.
- The user can access the following pages:
- Switch page: allows the user to connect any input to any output, save and recall up to ten connections.
- Administration pages: administrator can access setup pages, port setting page and update firmware page.
Assign names to video and audio inputs and outputs.
- Password page: allows the user to change the password for accessing the web interface.
- Help page: documentation on the usage of the web interface.
- Update Web Server page: globally update the web server to any settings that have been changed.
- Logout page: view currently active connections and logout of the web interface.
Telnet
- Security is ensured by password.
- Commands are similar to RS232 commands.
- The telnet server listens on ports 2000 and 2005.
- Port 2000 is for an operator telnet session.
- Port 2005 is intended for a software control type session.
Download Firmware
|