SERIMUX-SCRP-32DP

32-port SSH console serial switch, dual power, rackmount kit

SPECIFICATIONS

Compatibility
  • Supports most devices with an RS232 serial port.
  • Supports any VT type terminal.
Serial Interface
  • 8, 16 or 32 RJ45 EIA-232 serial port connectors.
  • One RJ45 EIA-232 console port connector.
  • Use straight-through CAT5 cable for console access to Sun Netra/Cisco equipment.
  • Flow Control:
    • Hardware RTS/CTS
    • Software XON/XOFF
  • Signals: RS232 Rx, Tx, RTS, CTS, DTR, DSR, GND.
  • Modem controls: DTR/DSR and RTS/CTS.
Network Interface
  • Two 10/100 Base-T Ethernet ports with RJ45 Ethernet connector.
  • Supports static and dynamic IP address.
PC Card
  • One PCMCIA interface slot supports any of the following:
    • Compact-Flash storage card.
    • Wireless LAN adapter (802.11b).
    • Ethernet LAN adapter.
    • PSTN/CDMA modem card.
Clustering
  • Supports NAT-based efficient and secure clustering.
  • Access up to 16 slave units.
Power
  • Input Voltage: AC 100 - 240V, 50 - 60Hz
  • Optional dual power available on 16- and 32-port models.
MTBF
  • SERIMUX-SCRP-8: 279,597 hrs
  • SERIMUX-SCRP-16: 223,997 hrs
  • SERIMUX-SCRP-32: 167,083 hrs
Regulatory Approvals
  • CE, UL, cUL, FCC, RoHS
Environmental
  • Operating temperature: 41°F to 122°F (5°C to 50°C)
  • Storage temperature: -22°F to 140°F (-30°C to 60°C)
Protocols
  • ARP, IP/ICMP.
  • TCP, Telnet, SSH v2.
  • DNS, Dynamic DNS.
  • HTTP, HTTPS, SMTP, DHCP.
  • PPPoE.
  • SNMP v3 (MIB II).
  • RIP, Static routing.
  • IPMI v2, DRAC, iLO
  • IPv4/IPv6 dual stack
  • Perl
Memory
  • 64MB SDRAM.
  • 8MB Flash.
  • Female USB Type A connector for expanded logging storage
Logging & Buffering
  • Deliver system log messages to NFS, syslog server or ATA Flash memory.
  • Store port buffer data to NFS, syslog server or ATA Flash memory.
  • Supports flexible buffer size management according to the media and the application.
  • Email alarm notification from the port alarm messages.
Package Includes:
  • SERIMUX SSH Console Serial Switch
  • Mounting kit.
  • RJ45 diagnostic loop back.
  • Adapters:
    • DB-25F to RJ45 console adapter.
    • DB-9F to RJ45 console adapter.
    • DB-25M to RJ45 console adapter.
    • DB-25M to RJ45 modem adapter.
  • 6-foot CAT5 cable.
  • 6-foot power supply.
  • User Manual.
Warranty
  • Two years