CONTROL METHODFront Panel Interface
- LEDs indicate currently selected port and mode of operation.
- Hold in any button for more than five seconds to go into Scan, Broadcast or Command Mode.
- In Normal Operating Mode, the user can directly operate the selected computer with transparent presence of the NTI switch.
- Scan Mode automatically and sequentially displays the video from each powered on computer for 2-255 seconds.
- Broadcast Mode allows the user's keystrokes to be sent to both powered on computers. (Broadcast Mode is not available for MACs.)
- Command Mode allows the user to give instructions to the switch through his/her keyboard. Keystrokes are not passed to the computer.
Keyboard
- Scan or Command Modes are available from the keyboard using hot keys.
- Use the keyboard to command the switch box to select ports or configure the Scan delay.
- Type +<`> (or +<`>) to go into Command Mode.
- Press to leave Command Mode and return to Normal or Scan Mode.
RS232 Control Method (Optional)
Control
- RJ45 connector.
- Baud rate 2400, 9600, 19200, or 38400.
- Use DIP switches to address up to 15 units, all of which can be daisy-chained and controlled by one serial port.
- Download RS232 protocol manual
Commands
- RS - causes switch to reset so that IN1 connects to OUT1.
- CS - causes one INx/OUTx connection to occur.
- RO - reads what input is connected to specified output.
- RU - reads size of matrix, reports number of inputs and number of outputs on specified switch.
|